Revolution XXL 3D Printer ~15" Cubed

Revolution XXL 3D Printer ~15" Cubed

Revolution XXL Dedicated 3D Printer Almost 15" Cubed Build Volume


More details


Availability: PRE ORDER

est. 8-10 Week Delivery Time!

Quick Start Guide

Direct Download Link

FTDI Com Port Drivers...Install These First!

Direct Download Link for Windows

Link to FTDI for Mac / Linux Drivers

Host Software: Repetier

Direct Download Link for Windows X64

Link to for Windows / Mac / Linux

Firmware: Repetier

Direct Download Link

Slicer: Slic3r | Please Use the Basic Configuration Files First

Break In Basic Config .1mm Solid Object (20% Infill) *right click save as

Break In Basic Config .1mm Hollow Object *right click save as

Direct Download Link for Windows

Link to for Mac / Linux

Pre-Sliced Vase Test Print @ .1mm Layers 1 Perimeter


All Our Printers are Turn Key and Are FULLY ASSEMBLED AND CALIBRATED.  You will have to confirm calibration upon receipt to insure transit did not throw it off.


Recent Customer Videos:

Printing at 400mm/s by pmodiano

Printing at 150mm/s by justjoe



The Revolution is Here!

The Revolution Family of 3D printers is the BEST value in the 3D printing industry, period.  Every Revolution is lovingly hand assembled by a talented group of technicians with incredible attention to detail.  If you want the fastest 3D printer on the market with exceptional print quality, then look no further, the Revolution is it!  Each printer comes with a 30 day warranty on all parts.


The Revolution is the only (aside from our RPM) fully CNC machined, billet aluminum 3D printer.  Every precision machined component fits together beautifully to ensure not only maximum precision and rigidity allowing much higher print speeds and repeatable consistent quality.

Both Revolutions use precision, super premium linear bearings and chromed, hardened and ground linear shafts for the smoothest, most precise motion.  The Kevlar reinforced belting allows rapid movement with virtually no backlash.

Our exclusive basalt (a naturally occurring volcanic glass) build platform is a massive departure from other 3D printers.  It is precision ground and polished for the flattest surface possible.  It will not warp or bow when heated and it is extremely durable; you will not damage this surface!

The Revolutions are the fastest professional quality 3D printers currently on the market.  In a temperature controlled environment, print speeds of 500mm/s are obtainable.  Even at maximum quality the Revolutions are significantly faster than the lowest quality settings on most 3D printers.  You can get high quality prints in MINUTES NOT HOURS!

Due to the unique properties of our Revolution, we are able to print hollow objects even with huge overhangs in ABS with no warping.  This allows not only a much faster print as there is no infill to be printed but a HUGE cost savings because of the reduction in filament usage; most prints can be printed using up to 4 times less filament and less time while still maintain quality.

Frame Material: CNC Laser Cut Stainless Steel

Frame Exterior Dimensions: < 19.5" x 19.5" x 18.75"

Frame Hardware: Stainless Socket Cap Screws (Metric)

Max Travel: Approximately 15" Cubed Build Area (Massive)

Maximum Travel Speed  (Limited By Build Area Not Mechanics) 1000+mm/s

Maximum Print Speed 500mm/s

Minimum Layer Height .05mm (50 micron) or Lower

Bed Material: 1/2" Thick Basalt (a volcanic glass) | Ground Flat | Will Not Sag Or Warp When Heated

Heated Bed: Yes, Silicone Rubber | Fast, Even Heating

Linear Motion Type: X/Y Belts and Linear Bearings | Z Precision ACME Screws / Linear Bearings

X-Motors: Dual NEMA 14 Motors w/ Up To 32x Microstepping

Y-Motors: Dual NEMA 17 Motors w/ Up To 32x Microstepping

Z-Motors: Dual NEMA 17 Motors w/ Up To 32x Microstepping

Electronics: Azteeg X1 (

Firmware: Repetier (a Marlin fork)

Stepper Drivers: Texas Instruments Based Drivers w/ 32x Microstepping

Power Supply: 24v 350w Dedicated Power Supply

Extruder: Single X-Truder w/ Dual Capable for Future Add On

Filament: 1.75mm ABS, PLA, Laywoo, Polycarbonate, Nylon, PEEK etc.

Max Sustained Temperature: 350c



No products

Shipping $0.00
Total $0.00

Cart Check out